操作方法：为摩托车除冬 并更换电池

如果您的摩托车电池经过检查且测试结果为“有缺陷”，则迫切需要更换。

我们向您展示如何一步一步地做到这一点。邦纳电池专家专门为您准备了重要提示。

所有信息均适用于整个两轮车行业，即摩托车以及轻便摩托车、踏板车和小型摩托车等日益强大的细分市场。

摩托车除冬和更换电池

• (7) 测试开始

   

  • 现在，启动发动机以确保新电池已正确安装和连接。
  • “VROOOM”——通常是一个好兆头。现在打开收音机。完美的。收音机代码已存在，保证您下次旅行时声音完整。

• (1) 找到电池

  • 通常电池隐藏在座椅或整流罩下方的某处。在许多情况下，电池将放置在塑料盒中或内部有衬垫的热保护装置中。这些信息通常可以在车辆手册中找到。不过，这并不影响更换电池的过程。
  • 关键字“与位置无关的安装”。请注意以下信息。当安装在横向或倾斜位置时，您绝对需要 Bike Bull GEL 或 AGM PRO 系列的防倾斜和防漏电池​​。在这种安装情况下，请勿使用 Bike Bull (Classic) 或 Bike Bull AGM 电池。我们尝试在电池分配中持续考虑这一点。

• (2) 用测试装置检查电池

  • 请注意在线文章中的信息。 操作方法：测试电池，当然，请务必阅读测试设备的操作说明。此处提供的信息旨在作为使用所有 Banner 测试设备的粗略指南。
  • 我们建议使用 Banner 电池测试仪 BBT DBA 进行定期电池检查（电压/冷启动）。
  • Please make sure to recharge the battery as soon as an open-circuit voltage limit of 12.5 V has been reached. To be able to measure the off-load voltage, you should wait approx. 5 hours after you have finished charging the battery (internally by alternator, externally by charger), or it has not been discharged for at least 1 hour.

   

  Banner tip: If the battery is charged when installed and not disconnected, never switch on the ignition. In the worst case, there is a risk of damage to control units.

• (3) Removing the battery

  • It is essential to observe the warning information on the battery and in the vehicle’s manual.
  • After you have found out how the battery is mounted, you can start with removing it. 
  • Before removing the battery, switch off the engine and all power consumers. Remove the ignition key; do not leave it in the ignition switch. Avoid short circuits caused by tools.
  • Change the battery in the vehicle. When removing the battery, first disconnect the negative terminal (-), then the positive terminal (+).

• (4) Isolate the positive terminal (+) of the old battery.

  • Please note: always secure the positive terminal (+) of the old battery against short-circuiting before transferring it to a used battery container. Attach the red terminal cap or insulate with adhesive tape (Powertape).
  • You, as the consumer, can then return the old motorbike battery free of charge to any Banner sales partner, regardless of the brand. In this way, we can guarantee environmentally friendly recycling.

• (5) Finding the right battery online

  • Find the right Banner battery using the battery search – for motorbikes, mopeds, scooters, ATV quads, jet skis, lawn tractors, UTV utility vehicles and snowmobiles.
  • Wherever possible with an upgrading recommendation for higher energy demand or higher cold start requirements We recommend testing it right away.

• (6) Installing a new battery

  • Before installing the new battery, clean the mounting space in the vehicle.
  • Only install a battery with an off-load voltage of >12.5 V.
  • Secure the new battery firmly in place.
  • Clean the battery terminals and terminal clamps and then apply some Banner terminal grease or terminal protection spray to the terminals.
  • For installation, proceed in reverse order, i.e. first connect the positive terminal (+) and then the negative terminal (-). Ensure that the terminal clamps are firmly attached.
  • Original attachments/sheathings must be refitted.

   

  Banner tip: For safety reasons, when installing the battery, always use a degassing tube.This will discharge the gases to the outside (does not apply to Bike Bull AGM, GEL and AGM PRO batteries). The degassing tube must not be kinked during installation. 

  Caution: Never install a maintenance-free battery (Bike Bull AGM, GEL, AGM PRO) in a motorcycle without a regulator. Do not exceed the max. charging voltage of 14.8 V.

• (7) Test start

   

  • Now, start the engine to ensure that the new battery has been installed and connected correctly.
  • “VROOOM” – is usually a good sign. Now switch on the radio. Perfect. The radio code is present and full sound is guaranteed for your next trip.

• (1)  Locating your battery

  • Usually the battery is hidden somewhere under the seat or the fairing. In many cases, the battery will be in a plastic compartment or inside padded thermal protection. This information can often be found in the vehicle’s manual. However, this does not affect the process for changing the battery.
  • 关键字“与位置无关的安装”。请注意以下信息。当安装在横向或倾斜位置时，您绝对需要 Bike Bull GEL 或 AGM PRO 系列的防倾斜和防漏电池​​。在这种安装情况下，请勿使用 Bike Bull (Classic) 或 Bike Bull AGM 电池。我们尝试在电池分配中持续考虑这一点。